Mar/07
MN
15
boxes, click
Next
, then click
Next
again.
5.
If the
Digital Signature Not Found
message appears, click
Yes
.
Our driver has been thoroughly tested for stability and
compatibility.
6.
Click
Next
, then
Finish
.
7.
Repeat steps
2-6
.
8.
Click
Yes
to restart to complete the installation.
For Windows® Vista
™
For New Installation
A new installation requires a floppy disk for the driver
installation. To make this floppy disk, copy the contents of
the “
Driver\x86” folder, found on the driver CD, onto a blank floppy
disk then follow the directions below.
1.
Setup the RAID Array prior to Windows installation.
2.
Follow Microsoft’s Windows installation procedure.
3.
Restart the computer when prompted by Windows’ installation.
4.
At the Windows Setup screen, press
Load Driver
to install the
RAID driver.
5.
Insert the floppy disk, please select
Silicon Image SiI 3132
SoftRaid 5 Controller (A:\si3132r5.inf)
, then press
Next
.
