IBR-10™ Installation Guide
3
C Using the Main Menu
The Main Menu is displayed when you log onto the IBR-10. From the Main Menu, you can configure
and operate the IBR-10.
Note:
Whenever you wish to return to a higher level in the IBR-10 menus, press
Escape
.
Caution:
The Supervisory connection to the device will time out after 5 minutes of console
inactivity. If you have changed the device’s configuration and wish to use the new configuration,
save (write) the configuration before you leave the console. (See
Section E,
Saving (Writing) the
Device’s Configuration
.)
1
On the Main Menu, do one of the following:
a
For a basic configuration of the IBR-10 for your network, select
QuickStart Config Builders
.
❖
The Startup Config Options menu is displayed. You can enter basic information on this menu;
the IBR-10 will use this information to build a standard configuration. Go to
Section D.1,
Startup
Configuration
.
Main Menu
----------
1) QuickStart Config Builder
2) Typical Configurations
3) Advanced Configurations
4) Tools
V) View Current Unit Status
L) Load Factory Defaults
P) Load Plug and Play Defaults
W) Write Configuration
R) Reset Unit
X) eXit Session
S) Statistics
Y) sYstem Administration
Enter Choice :
Startup Config Options
-----------------------
1) BANKING
Enter Choice :
!
Summary of Contents for IBR-10
Page 14: ...14 IBR 10 Installation Guide...
