Version
Document Title
Release Date
02
Narrow Body EL2.1 (REV. A)
–
Owner's Manual
2021-03-22
EL 2.1 -
Owner’s
Manual - Rev.02
–
Mar 2021
13
I
NSTALLATION
Please refer to the "
" section for a detailed list of instructions
–
it is required for all
installers and technicians to follow these general set of rules as a minimum precautionary measure to
allow the safe installation and commissioning of the system.
Any person working on the system must be familiar with the hazards and risks associated with
installing, commissioning, and running the EL2.1.
Tools, material and accessories required
The following tools and equipment are needed to set up the device successfully.
Tools
•
9/16" combination wrench
•
5/8" combination wrench
•
Plastic pipe cutter
•
Phillips head screwdriver (PH 0x60)
•
Stainless steel pipe cutter
•
¼" Tube Bender
Material
•
Stainless steel AISI 316L- ASTM A269 -
1/4”
OD X 0,89 mm wt.
•
8mm OD LLDPE pipe
•
10 mm OD LLDPE pipe
•
Pipe push-fit locking clips (8/10 mm)
Accessories (included in the box)
•
Electrolyte filling bag (labelled)
•
Safety chain jumpers
•
Ferrite for power input cable
•
Swagelok Nut and Ferrule set
•
10mm Check Valve **only needed when connecting multiple Electrolysers**
