Speedsynchro
®
Mini
4
Operating instruction edition: 13.09.2022
1 Application range, safety instructions and technical data
1.1 Application range, determined use
The collet holders type Speedsynchro
®
Mini are used on CNC-machining centers with
synchronous control. They are intended for clamping of taps/cold-forming taps for
thread production.
Normally the Speedsynchro
®
Mini are equipped with the following shank:
BT 30 (DIN) ISO 7388-2 JD
Applicable for cutting range M1
– M6, please refer to Table
The tap/cold-forming tap is locked via the collets according to DIN ISO 15488.
The collets must be chosen depending on the used type and used tap/cold-forming
tap, for more information please refer to chapter 2.6, page 15.
The collet holders type Speedsynchro
®
Mini are designed for coolant-lubricant
pressure up to 70 bar.
For correct use, the Speedsynchro
®
Mini must be secured against twisting in the
machine spindle. This requires a stop fixture adapted to the machine-side locking
block. For further details, please refer to chapter 2.2 page 8.
The non-determined use exempts the manufacturer from any liability.
