Speedsynchro
®
Mini
14
Operating instruction edition: 13.09.2022
2.5 Sealing disk / cooling disk
Application
The sealing disks or cooling disks are inserted into the clamping nuts for producing
threads with internal coolant supply. The sealing disks respectively the cooling disks
additionally avoid the penetration of dirt and chips into the collet slots. We do
recommend the use of sealing disks or cooling disks.
In contrast to the sealing disks, the cooling disks guide the coolant directly along the
tool.
Note
Normally a clamping nut for sealing disks/cooling disks is part of the delivery.
The sealing disk or cooling disk has
to be ordered separately, suitable for clamping
nut and clamping diameter!
Assembly of the sealing disk or cooling disk
1. Screw off the clamping nut
2. Insert sealing disk/cooling disk
into clamping nut as shown on
picture.
Push sealing disk/cooling disk
forward into clamping nut until
you clearly hear the
engagement.
The sealing disk must be flush
at the front with the clamping
nut.
Click !
Sealing disk
Click!
Cooling disk
