Speedsynchro
®
Mini
Operating instruction edition: 13.09.2022 13
2.4 Re-putting into operation
If the Speedsynchro
®
Mini is put back into operation as described in chapter 5, page
22, please go through the following steps:
-
Clean the Speedsynchro
®
Mini with a duster to remove any conservation oil
Note
Do not use any aggressive solvents.
Do not use fibrous materials i.e. steel wool.
-
Test the stop fixture:
Press the fixing bolt down
The fixation must be released, green marking
ring is
not
page 9.
Release the fixing bolt
The stop fixture is engaged in the angular position,
green marking ring is visible, please refer to
