Operating instruction for collet holder
type Softsynchro
®
/ PGR
4
Edition: 01.04.2012
®
1.2 Specifications
Further features of the collet holders type Softsynchro
®
/ PGR are:
-
For collet holders with cylindrical shank:
The standardized cylinder shank acc. to DIN 1835 B+E allows a simple adaptation with
the required adaptation shank. For adaptation shanks please refer to the EMUGE main
catalogue.
-
Quick clamping: tool change within 10 seconds
-
Clamping true to the µ: high concentricity guarantees reliable and repeatable tool life
values and high surface quality
-
Length adjustment of the tool through integrated adjusting screw in the collet
-
Suitable for VHM and HSS tools
1.3 Safety instructions
For all works, i.e. putting into operation, production and maintenance, please observe the
details given in the operating instructions.
All relevant safety regulations as well as local instructions are to be observed when working
with the collet holders.
Below please find some basic rules:
-
Please wear gloves during tool change to avoid injury.
-
Basically change the tool yourself to avoid the sudden start of the spindle
caused by misuse.
-
Hold the tool when loosening the tool clamping to avoid it falling down and
damaging the tool and the workpiece.
-
Please keep the tool adaptation clean.
-
There are maximum values for cutting speeds and feeds for every kind of
machining. Please observe such data.
-
Please observe the maximum tool dimensions.
-
Furthermore, the instructions of the tool manufacturers are valid!
