Operating instruction for collet holder
Type Softsynchro
®
/ PGR
Edition: 01.04.2012
7
®
2.4 Assembly of the coolant-lubricant pipe for collet holders with shank type HSK
(hollow taper shank DIN 69893A)
a) Components
b) Prepare coolant-lubricant pipe
1. Slide on the two O-rings.
2. Slide on thread nut.
c) Mount coolant-lubricant pipe in the shank
Required tool
:
Assembly wrench, choose appropriate assembly wrench for the shank size
(For the assembly wrench please refer to the EMUGE main catalogue, category
accessories)
Groove
Pin
1. Put assembly wrench on the
coolant-lubricant pipe
Watch the position of the
pins against the grooves!
2. Screw coolant-lubricant pipe
in the shank
Coolant-lubricant
pipe
O-ring small
cross-section
O-ring big
cross-section
Thread nut
O-ring small cross-section
O-ring big cross-section
