EMTRON EIC USER MANUAL
WWW.EMTRON.WORLD
© EMTRON AUSTRALIA PTY LTD APRIL 2018
20
5.0 ECU Channel Configuration
Once the ECU has been configured to receive the EIC4/ECIC16M data, the next step is
assigning the data to an ECU channel(s). The example shown in Figure 5.0 shows the
following channel assignments:
-
Compressor Inlet Pressure assigned to EIC16M channel 1
-
Compressor Outlet Pressure assigned to EIC16M channel 2
-
Compressor Inlet Temperature assigned to EIC16M channel 9
-
Compressor Outlet Temperature assigned to EIC16M channel 10
NOTE:
EIC16M pullup control is done through the Config View-> Communications -> Emtron
CAN Devices -> Emtron Input to CAN Expansion menu. See Section 6.2 for more information.
Figure 5.0
