EMTRON EIC USER MANUAL
WWW.EMTRON.WORLD
© EMTRON AUSTRALIA PTY LTD APRIL 2018
18
4.22 EIC CAN Base Address ID Reprogramming
To ensure each EIC device has a unique ID from the example in Figure 4.6, EIC10 Device 2
needs a new Base Address of 722.
This is easily done using Emtune from the Config view -> Communications Menu -> Emtron
CAN Devices -> Emtron CAN Device Programming menu.
Device 2 ID Reprogramming
Enter in Serial Number = 1235
Enter in Custom Address = 722
Make sure the “Program
Address” checkbox is ticked.
Select the “Program” button and the new
Custom Address ID will be programmed into the
device.
To check the device(s) have been programmed correctly with the new Base Address IDs,
open the ECU Runtime menu (F3)-> Communications Tab. Each device now has a unique
Base Address ID. See Figure 4.8.
Figure 4.8. 2x
EIC10 Devices detected by the ECU with reprogrammed IDs
Each device now as a unique CAN Base Address ID and will be transmitting valid data on the
Bus.
