.
LIN ANG
Enter the line angle.
.
LIN ANG
Line-Hole Function: Continued…
Use the Message
Navigation keys
.
NO. HOLE
Enter the line number of holes.
NO. HOLE
Once all the parameters have been entered you can check them by going back through them using the
navigation key . Alternatively you can also start using the PCD immediately by pressing the key once more.
.
HOLE 1
.
The message window will show the current selected Hole
number and the X and Y-axis will show the offset to the
centre of that hole. By moving the axes until they are
both showing
.
you will now be at the calculated
hole centre.
Navigate between holes using the Message navigation keys.
.
HOLE 2
.
.
HOLE 1
.
Check ABS position whilst in the Line-Hole Function
If at any time whilst in the Line-Hole function you would like to check the standard ABS position, relative to the
workpiece datum this can be done using the key. The Line-Hole function is still active in the background. Once
you have checked the positions re-enter the function offset display by again pressing the key.
.
HOLE 1
.
.
HOLE 1
.
.
HOLE 1
.
- 24 -
Summary of Contents for EM250 Series
Page 2: ......
