EMS SYSTEM 7000
©2015 EMS Security Group Ltd. All rights reserved. TSD248 Iss 2 25/06/15 AJM
24
15.10 Select Alarm N/O or Local N/O by
using the “
” and “
” buttons and
when the required setting is
between the > and < arrows press
the “1” button and observe the
display changes to:
Operate Transmitter
NOW or press
Escape to cancel
16:38
15.11 Activate the required input to be
added by applying or removing
voltage (depending upon N/O or
N/C input) and the screen will
display:
Reset Transmitter
NOW
16:38
15.12 After a short period of time the
screen will change to display:
Operate Transmitter
Again or press
Escape to cancel
16:38
15.13 Using the same operation, once
again generate a transmission,
after a short period of time the
screen will change to display:
Contact 001
Added
Push any key
16:38
15.14 You may now add additional inputs by repeating the actions detailed. If no further
inputs are to be added then escape from this menu by pressing the “3” button on
the keypad or returning the control keyswitch to the “CLEAR” position.