EMS SYSTEM 7000
©2015 EMS Security Group Ltd. All rights reserved. TSD248 Iss 2 25/06/15 AJM
21
14. Adding An Input (Hand push Mode) Into The IRIS Radio Receiver
The following sequence of operations is required when adding an input with the mode
setting programmed as hand push into the UHF IRIS Radio Receiver.
14.1 With the control keyswitch in the
“CLEAR” position the screen
should now display:
System Clear
01/10/93 13:26
14.2
Turn the control keyswitch to the
“RESET” position. The screen
should now display:
*** SYSTEM RESET ***
13:26
14.3 Press the “0” key, and the screen
will now display:
Enter Your PIN
For Menus > _
=Done
=Del 13:26
14.4 Enter the engineering default
PIN: “221100” and then press
the “
” button, the screen will
now display:
| ** Main Menu **|
>Pins & Access <
| System Support |
2=Help 13:27
14.5 Press the “
” button until screen
displays:
| Time and Date |
> Radio Setup <
| Output Setup |
2 = Help 16: 37
14.6 Press the “1” button and the
screen will display:
| ** Radio Setup ** |
> Add Transmitter <
| Txer Details |
2 = Help 16:37
14.7 Press the “1” button and the
screen will display:
| -Add Transmitter-|
> Add Hand push <
| Add Moneyclip |
2 = Help 16:37
14.8 Press the “
” or “
” buttons to
highlight the type of transmitter
to be added, and press the “1”
button and the screen will change
to display the options available:
| - Hand push Type - |
> Opposed Action <
| Non-Opposed |
2 = Help 16:37
14.9 With the opposed action between
the > and < arrows, press the
“1” button and the screen will
change to display:
Operate Transmitter
NOW or press
Escape to cancel
16:38
