background image

Follow these steps weekly for optimal results:

Keep the chain clean and lubricate it well. This way you prevent rust and dirt from getting on and in your bike.

Check the tire pressure and inflate it regularly. This way you get the most out of your battery and prevent 
unnecessary wear.

Clean the pedal pod with a sponge and lukewarm water if it has become very dirty.

Check the spokes. Do you see anything strange with the spokes? Please contact the EMQ service team directly. 
We check this for you.

Do the brakes still work well?

Check your wheels regularly: is there a blow in your wheel? Or do you notice that there is play in your wheels? 
Then contact the EMQ service team directly. We check this for you.

Does the lighting still work well? And are you sufficiently visible in the dark?

14. 

Warnings

Please read this manual carefully. We request that you abide by the instructions we have set out herein. This way 
you guarantee your own safety and maximize the lifespan of your EMQ e-bike.

Here's a brief summary of the most important warnings:

Do not extend the stem beyond the maximum height indicated on the stem itself.

Do not extend the seat post beyond the maximum height indicated on the seat post itself.

With the unfolding, the chain goes from a relaxed to a tense state. Always do this with care and policy: the 

chain must be given time and space to find the teeth of the sprocket again.

When you ride the EMQ e-bike for the first time, pull up WITHOUT pedal assistance. Only turn this on when 

you are already cycling. This is how you get used to the pedal support carefully

Before dismounting, turn off the support.

Do not completely discharge the battery.

The charging port cover must be closed properly after charging, otherwise moisture can enter the bicycle.

Never try to remove the battery from the frame yourself.

Check the tire pressure regularly.

If the front lamp cover is broken, have it replaced as soon as possible by the EMQ service team

Do you not plan your maintenance, or do you schedule it much too late, and does this result in unnecessary 

wear or actual load on the bicycle? Then the warranty may become void.

Summary of Contents for e-bike V 3.0 2022





















Reviews: