26563-0-0410
Page 6
Water vapor is a by-product of gas combustion. An unvented room
heater produces approximately one (1) ounce (30 ml) of water for
every 1,000 BTU's (.3KW's) of gas input per hour.
Unvented room heaters must be used as supplemental heat
(a room) rather than a primary heat source (an entire house). In most
supplemental heat applications, the water vapor does not create a
problem. In most applications, the water vapor enhances the low
humidity atmosphere experienced during cold weather.
The following Steps will help insure that water vapor does not
become a problem.
1. Be sure the heater is sized properly for the application, including
ample combustion air and circulation air.
2. If high humidity is experienced, a dehumidifier may be used to
help lower the water vapor content of the air.
3. Do not use an unvented room heater as the primary heat source
(an entire house).
WATER VAPOR: A By-PRODUCT OF UNVENTED ROOM hEATERS
Model
VFP30CA30(B,F,M,S,W)
Input BTU/HR (KW/H) Maximum 32,000 (9.4)
BTU/HR (KW/H) Minimum 22,400 (6.6)
Height
27 3/4" (704.9 mm)
Width
28 1/16" (712.8 mm)
Depth
17 1/8" (435.0 mm)
Gas Inlet
3/8" (9.5 mm)
Accessories
FRBc
Battery Operated Remote Control
FRBtc
Battery Operated Remote Control w/Thermostat
FRBtP
7-Day Programmable Remote
FRec
Electric Remote Control
FWs
Wall Switch
tMV
Millivolt Wall Thermostat - Reed Switch
tRW
Remote Wall Thermostat
ciB
Automatic Blower
Stone Inlay Replaces Standard Grill Top
csi-8V
Stone Inlay
Venetian Gold
csi-9a
Stone Inlay
Adobe Frost
csi-10M
Stone Inlay
Patina Mocha
csi-11g
Stone Inlay
Temple Gray
csi-12a
Stone Inlay
American Beauty
SPECIFICATIONS
Accessories
Shelf Kit - Includes both left & right shelves
csk-B
Porcelain Black
csk-F
Matte Black
csk-M
Porcelain Mahogany
csk-s
Porcelain Sand
csk-W
Matte Pewter
