background image

Page 1

UNIVERSAL FIREBOX FOR 

ALL VENT-FREE LOG SETS

MODELS

VFD32FB0L-2

VFD36FB0L-2

VFD42FB0L-2

VFD32FB2CL-2 VFD36FB2CL-2 VFD42FB2CL-2
VFD32FB2DL-2 VFD36FB2DL-2 VFD42FB2DL-2

VFD32FB2ML-4 VFD36FB2ML-4 VFD42FB2ML-4

VFD32FB0F-2

VFD36FB0F-2

VFD42FB0F-2

VFD32FB2CF-2 VFD36FB2CF-2 VFD42FB2CF-2
VFD32FB2DF-2 VFD36FB2DF-2 VFD42FB2DF-2

VFD32FB2MF-4 VFD36FB2MF-4 VFD42FB2MF-4

VFD32FB0SF-1 VFD36FB0SF-1 VFD42FB0SF-1
VFD32FB2SF-1 VFD36FB0SF-1 VFD42FB2SF-1

INSTALLATION  INSTRUCTIONS 

AND  OwNER'S  MANUAL 

Deluxe Vent-Free Universal Fireboxes 

GAS-FIRED

EMPIRE

EMPIRE

Comfort Systems

Installer: 

Leave this manual with the appliance.

Consumer:   Retain this manual for future reference.

FOR USE ONLy wITh A LISTED GAS-FIRED  

UNVENTED DECORATIVE ROOM hEATER NOT TO EX-

CEED 40,000 BTU/h.

DO NOT BUILD A wOOD FIRE.

wARNING:  Improper installation, adjustment, altera-

tion, service or maintenance can cause injury or property  

damage. Refer to this manual. For assistance or additional 

information, consult a qualified installer, service agency or 

the gas supplier.

Carefully review the instructions supplied with the decora-

tive type unvented room heater for the minimum fireplace 

size requirement.

DO NOT INSTALL A VENT-FREE LOG SET IN ThIS FIREBOX, 

UNLESS ThIS FIREBOX MEETS ThE MINIMUM DIMENSIONS 

REQUIRED FOR ThE INSTALLATION.

ANSI Z21.91 Ventless Fireplace Enclosures for Gas Fired 

Decorative Type Unvented Room heaters

wARNING: If the information in these instructions are not 

followed exactly, a fire or explosion may result causing 

property damage, personal injury or loss of life.

—  Do not store or use gasoline or other flammable vapors 

and liquids in the vicinity of this or any other appliance.

—  whAT TO DO IF yOU SMELL GAS

 

•  Do not try to light any appliance.

 

•  Do not touch any electrical switch; do not use any 

phone in your building.

 

•  Immediately  call  your  gas  supplier  from  a  neigh

-

bor’s  phone.  Follow  the  gas  supplier’s  instruc

-

tions.

 

•  If you cannot reach your gas supplier, call the fire 

department.

—  Installation and service must be performed by a quali

-

fied installer, service agency or the gas supplier.

DO NOT ATTEMpT TO MODIFy OR ALTER ThE CONSTRUC-

TION OF ThE FIREBOX OR ITS COMpONENTS. ANy MODI-

FICATION OR ALTERATION OF CONSTRUCTION MAy VOID 

ThE wARRANTy OF ThIS FIREBOX.
ChILDREN AND ADULTS ShOULD BE ALERTED TO ThE 

hAZARDS OF hIGh SURFACE TEMpERATURE AND 

ShOULD STAy AwAy TO AVOID BURNS OR CLOThING IG-

NITION.
yOUNG ChILDREN ShOULD BE CAREFULLy SUpERVISED 

whEN ThEy ARE IN ThE SAME ROOM AS ThE FIREBOX.

Summary of Contents for VFD32FB0F-2

























Reviews: