![background image](http://html1.mh-extra.com/html/empire-comfort-systems/traditional-dxt30in-nat/traditional-dxt30in-nat_installation-instructions-and-owners-manual_2403983032.webp)
31210-1-0713
Page 32
REMOTE CONTROL OpERATION INSTRUCTIONS
NOTICE:
ON/OFF rocker switch must be ON for the remote to
operate.
Features
:
Main Burner ON/OFF
Main Burner flame modulation (6 levels)
Choice of standing or intermittent pilot
Thermostat or Smart thermostat functions
On/Off relay*
Comfort Fan speed modulation (6 levels)
*Not available on DXT(30,35)IN models.
Remote Control Information
Supply Voltage: 4.5 V (three 1.5 V AAA batteries)
Ambient Temperature Ratings: 0 - 50°C (32 - 122°F)
Radio Frequency: 315 MHz
NOTICE:
THE TRANSMITTER AND RECEIVER ARE RADIO
FREQUENCY DEVICES. PLACING THE RECEIVER IN OR
NEAR METAL SEVERELY REDUCES THE SIGNAL RANGE.
NOTICE:
TURN “OFF” THE MAIN GAS SUPPLY OF THE APPLI-
ANCE DURING INSTALLATION OR MAINTENANCE OF THE
RECEIVER DEVICE.
NOTICE:
FOR INSTALLATION/MAINTENANCE, SWITCH OFF
THE INSERT BY REMOVING MAIN POWER SUPPLY AND BAT-
TERIES IF INSTALLED.
WARNING
• FIRE HAZARD. Can cause severe injury or death.
• The Transmitter causes ignition of the appliance. The
appliance can turn on suddenly.
• Keep away from the appliance burner when operating
the remote system.
Figure 32b
Figure 32a