31210-1-0713
Page 18
REFLECTIVE LINER pLACEMENT
See page 15 for Glass removal.
1. Tilt the burner cover out from the back past the front of the
unit. Tilt the burner cover to the side and lift out. See Figure
21. Set the burner cover aside. If a reflective burner cover is
to be used, discard the burner cover that has been removed.
Figure 21
Figure 22
2. Place rear liner in back of unit.
Figure 23
3. Place the burner cover into the Insert. Angle one corner into
the bottom first, and then set the other corner down. Gently
lower the burner down over the burner and onto the firebox
bottom.
Figure 24
Figure 25