background image

 

WARNING

If not installed, operated and maintained in 

accordance with the manufacturer's instruc-

tions, this product could expose you to sub-

stances in fuel or from fuel combustion which 

can cause death or serious illness.

 

WARNING

If the information in these instructions are 

not followed exactly, a fire or explosion may 

result causing property damage, personal 

injury or loss of life.

Installation and service must be performed 

by  a  qualified  installer,  service  agency  or 

the gas supplier.

OUTDOOR lINeAR 

GAS FIReplAce

MODelS

Oll60Fp12S(N,p)-1

Oll60Sp12S(N,p)-1

GAS-FIRED

!

 

DANGeR

cARBON MONOXIDe HAZARD

This appliance can produce carbon monoxide 

which has no odor.
Using it in an enclosed space can kill you.
Never use this appliance in an enclosed space 

such as a camper, tent, car or home.

 

WARNING

For Outdoor Use Only.

 

WARNING

If you smell gas:

1.  Shut off gas to the appliance.

2.  Extinguish any open flame.

3.  If odor continues, keep away from the 

appliance and immediately call your gas 

supplier or fire department.

 

WARNING

Improper installation, adjustment, altera-

tion, service or maintenance can cause 

injury or property damage. Read the instal-

lation, operating and maintenance instruc-

tions thoroughly before installing or servic-

ing this equipment.

 

WARNING

Do not store or use gasoline or other flam-

mable vapors and liquids in the vicinity of 

this or any other appliance.
An propane-cylinder not connected for use 

shall not be stored in the vicinity of this or 

any other appliance.

INSTAlleR: 

leave this manual with the appliance.

cONSUMeR: 

Retain this manual for future reference.

INSTAllATION INSTRUcTIONS

AND OWNeR’S MANUAl

Page 1

Summary of Contents for OLL60FP12S









































































Reviews: