35008-12-0519
Page 22
FIReplAce FRAMING AND INSTAllATION
FINISHING
crushed Glass Installation
Ensure the burner cover screens are still properly installed, fully
covering the LED openings. Place decorative crushed glass
evenly over the burner cover, screen and burner (enough media
to cover approximately 10 square feet). Ensure coverage is even
and not thicker in places. Some pieces of broken glass may be
larger than others. It is fine to use these pieces, but not over the
burner or flame area.
See Figure 25.
Decorative glass droplets may be added as an enhancement, but
can not be used near or over the burner.
See Figure 26.
Neither
glass nor droplets may be placed over the spark probe.
Figure 25
Figure 26
