29432-1-0512
Page 15
Remote Functions - Pre-Set Weekly Programs
The remote control is equipped with ten pre-set weekly operation
programs. These programs allow the fireplace to be operated only
during peak usage times.
1. Select the desired operation mode for the remote; Manual or
Thermostatic Mode.
2. Press the menu button twice to enter the program selection
menu. A clock icon will show on the remote display.
3. Use the adjustment button to select the desired program.
4. Once the desired program is selected,press the menu button
to save the setting and return to the remote’s home screen.
The outline of the clock icon indicates that the program mode
is active.
AUTO
Note:
If the remote buttons are not used for seven seconds
while setting the sleep timer, the remote will automatically exit
the sleep timer menu and assume the last settings entered in
the menu.
To deactivate the Program Mode, return to the program selection
menu and set the program to “OFF.” Press the menu button to exit
the menu and save the setting. The remote’s home screen will no
longer display the clock icon, indicating that the program mode is
not active.
Note:
While the Program Mode is active, the remote will re-
spond normally to new commands entered.
12:00
AM
1:00
AM
2:00
AM
3:00
AM
4:00
AM
5:00
AM
6:00
AM
7:00
AM
8:00
AM
9:00
AM
10:00
AM
1
1:00
AM
12:00 PM
1:00 PM
12:00 PM
1:00 PM
2:00 PM
3:00 PM
4:00 PM
5:00 PM
6:00 PM
7:00 PM
1
1:00 PM
8:00 PM
9:00 PM
10:00 PM
12:00
AM
Mon - Fri
Sat - Sun
Mon - Fri
Sat - Sun
P01
P02
Mon - Fri
Sat - Sun
Mon - Sat
Sun
P03
P04
Mon - Sat
Sun
P05
Mon - Fri
Sat - Sun
Mon - Fri
Sat - Sun
P06
P07
Mon - Fri
Sat - Sun
Mon - Fri
Sat - Sun
P08
P09
Fri
Sat - Sun
P10
No.
Days
Weekly Program
Timetable
The chart below outlines the timing of the 10 pre-set programs. The shaded areas show the time when the appliance would be ON.