29432-1-0512
Page 13
Circulating Air Blower Operation
The circulating air blower is operated by a temperature sensing
thermistor located in the top of the fireplace. The blower will
activate after approximately 3 to 5 minutes depending on
flame level. The blower will automatically adjust its speed as
the fireplace warms up. The blower speed is indicated on the
display panel.
Mantis
BLOWER
SPEED
REMOTE
MANUAL
OFF
FLAME
LEVEL
MANUAL
FLAME LEVEL
ADJUSTMENT
UP
MODE
SELECT
DOWN
DISPLAY
BACK LIGHT
Low Blower Speed
Mantis
BLOWER
SPEED
REMOTE
MANUAL
OFF
FLAME
LEVEL
MANUAL
FLAME LEVEL
ADJUSTMENT
UP
MODE
SELECT
DOWN
DISPLAY
BACK LIGHT
Medium Blower Speed
Mantis
BLOWER
SPEED
REMOTE
MANUAL
OFF
FLAME
LEVEL
MANUAL
FLAME LEVEL
ADJUSTMENT
UP
MODE
SELECT
DOWN
DISPLAY
BACK LIGHT
High Blower Speed
After the fireplace is turned off, the blower will continue to operate,
automatically adjusting its speed as the fireplace cools. Once the
fireplace cools sufficiently the blower will turn off.
Note:
When the fireplace is turned off, the blower speed will
not be displayed while it is running.
Humidifier Operation
The Mantis Power-Vent High-Efficiency Fireplace has an automat
-
ic humidifier designed into the fireplace. As the fireplace operates,
condensate is created and collected inside the fireplace. The col
-
lected condensate is then transferred to a pan on top of the fire
-
place where it evaporates into the air stream. The humidifier does
not operate with every cycle.
While the condensate is being transferred to the pan, it is normal
to hear a slight hissing sound. The “AUX” symbol will be displayed
while the condensate is being transferred.
Mantis
BLOWER
SPEED
REMOTE
MANUAL
OFF
FLAME
LEVEL
MANUAL
FLAME LEVEL
ADJUSTMENT
UP
MODE
SELECT
DOWN
AUX
DISPLAY
BACK LIGHT