Phoenix User’s Manual
14
6.1.3 Modulated TENS – P3
This treatment is a modulated TENS program for the treatment of post-surgical or chronic
pain. Use this program with direct lead wires and electrodes (included in the device box),
not
with the garment. Place the electrodes around the site of the pain.
TENS
PARAMETER
SETTING
Waveform
Symmetrical square biphasic
asynchronous, frequency modulated
Treatment time
Unlimited*
Cycling type
Continuous
Pulse duration
80µs
Frequency 1
120 Hz
Frequency 2
90 Hz
Modulation time
4 sec
* “Unlimited” means that the timer does not automatically stop the
treatment after a set time.
6.1.4 Edema – P4
This treatment option is a sequenced, net positive DC 2-channel program for edema reduction
and increased circulation. For acute Edema (less than 48 hours post-injury or post-op), place
the positive electrodes over the treatment site and attach the negative leadwire pins to the
dispersive pad. For chronic Edema (no immediate prior injury/surgery or more than 48 hours
post-injury or post-op), place the negative electrodes over the treatment site and attach the
positive leadwire pins to the dispersive pad.
EDEMA
PARAMETER
SETTING
Waveform
Net positive pulsed DC
Treatment time
30 min
Cycling type
Continuous
Pulse duration
60-120 Hz
Frequency
222Hz
6.2 Choice of the Appropriate Program
The choice of a program is determined by your clinician based on the affected body part(s).
The appropriate muscle stimulation program(s) (e.g., Strength, Endurance, TENS or Edema)
and frequency of the program(s) are determined by your clinician. Consult your Clinician or
therapist if you are unsure which program to use.
