5.
Setting function
To access the setting function, press the Settings button on the switch panel. There are seven Settings.
You can press the Settings button repeatedly to select the Settings
This parameter is set to facilitate users to enter the demonstration mode and perform operations on
the interface in any mode. However, heating components such as the electric heat pipe are not enabled.
The default value is OFF. Press the Settings key 5 times to enter the demo, then press the number key 1
to switch. Touch the Start key to confirm exit
Sound is used to control whether or not the buttons sound, but the work tone is always present. Press
the Settings button three times. The current sound status is displayed in the middle of the screen. On
indicates that sound is enabled, and Off indicates that sound is disabled. You can switch by touching
the number key 1. Touch the Start key to confirm exit
Press the Settings button twice. The interface displays the default unit to set the temperature unit.
The default unit is Fahrenheit set sound
Set sound:
Setting Demo mode:
Setting temp unit:
Setting clock:
Sabbath
Clock
Temp unit
Sound
Calibration
Demo mode
Touch five
Touch four
Press1
：
On/Off
Press1 to change mode
Then Press3 to increase
Press6 to decrease
Off
00°F (-30°F - 30°F)
12/24 H
Touch six
Press1
：
12 H/24 H
12 H
Touch three
Press1
：
On/Off
On
Touch twice
Press1
：
Degree F/C
F
Touch one
Set clock
12:00PM
Parameter that can
be set
Touch Settings
repeatedly
Configurable content
Default
Touch seven
Press1
：
On/Off
Off
Touch the Settings once to enter the clock setting. By default, the current time is 12:00
At this time, you can enter the required time, for example, 11:00, you can touch 1, 1, 0, 0, the original
time number first zero, --:--, and then the number changes from right to left, press the start key to
save the current data and exit, or directly cancel not saving the current data and exit.
1
0
