Page 31
Connecting a Cassette Tape or DAT Deck
This configuration shows a Cassette Tape Deck connection where the audio output is taken
from the left and right audio outputs (may also be labeled PLAY). If you plan to use the
Cassette Tape Deck for recording, you also must connect the DMC-1’s TAPE audio outputs
into the Cassette Tape Deck inputs (may also be labeled RECORD).
Depending on the type of tape deck you connect, the inputs and outputs on the DMC-1 can be
connected to TAPE or DAT. If you have both types connected, the DMC-1 will switch automati-
cally on to whichever source is playing. You can’t have both playing at the same time. In the
diagram shown, recording from any selected source is possible except recording between
Cassette Tape and DAT. This is called “dubbing” and is beyond the design intent of the Emotiva
DMC-1 preamplifier/processor.
Designed in
USA
Built with prid
e
in China
Designed in
USA
Built with prid
e
in China
The Tape Deck outputs are
sometimes labeled PLAY
1
1
The Tape Deck inputs are
sometimes labeled RECORD
2
2
Summary of Contents for DMC-1
Page 1: ...professional AV Processor USER S GUIDE...
Page 2: ......
