4
E0802 - WSC 802 -manual
0-0-0-K
EMOS spol. s r. o.
Example:
If you set time limit, M button in position AUTO and cycle
ON, the display is lit after set time, crystal with current
forecast and gradually other crystals, each for the dura-
tion of 1 second.
If you set time limit, M button in position AUTO and
cycle OFF, the display is lit after set time and crystal with
current forecast.
Weather forecast
The weather forecast is based on the atmospheric
pressure for following 12 – 24 hours for surroundings
within 15 - 20kms.
As the weather forecast does not necessarily always come
100% right, the manufacturer and/or vendor does not
bear any responsibility for damage caused by inaccurate
weather forecast.
When the station is started for the first time, it takes
approximately 12 hours before it starts forecasting
correctly.
The weather station shows 4 icons of weather forecast.
sunny
cloudy
overcastted
rain
Troubleshooting
If the time is not displayed or if the receiving icon is not
displayed, reset the clock by pressing RESET button.
Incorrect time or defect in synchronization may be caused
by external electromagnetic interference.
Service and maintenance
The product is designed to serve for many years on
condition of correct handling. Here is some advice for
correct operation:
• Before you start to work with the product, read
carefully the user’s manual.
• Do not expose the product to direct sunlight, extreme
cold and humidity and sudden changes of tempera-
ture (it would reduce sensitivity).
• Do not place the product to places susceptible to
vibrations and shocks – it may cause damage to it.
• Do not expose the product to excessive pressure,
impacts, dust, high temperature or humidity – it may
cause malfunctioning of the product, lesser energy life,
damage to batteries and deformation of plastic parts.
• Do not expose the product to rain and damp, if it is
not designed for outdoor use.
• Do not place the product on any sources of open fire,
e.g. burning candle etc.
• Do not place the product to places where there is
insufficient air flow.
• Do not put any objects into ventilation openings of
the product.
• Do not interfere with the internal electrical loops
of the product – it may be damaged which would
automatically terminate warranty. The product is to
be serviced only by qualified person.
• Clean with fine moist cloth. Do not use solvents
or cleaning agents – it may scratch plastic parts or
damage electrical loops.
• Do not submerge the product into water and/or other
liquids.
• The product must not be exposed to dripping or
splashing water.
• In case of failure or break down of the product do not
perform any service by yourself. Bring it to the store
where you bought it.
• This device is not designed for use by persons
(including children), who, for their physical, sensual
or mental ability or lack of experience, cannot use
the device unless they are supervised, or unless they
have been instructed in use of the device by person
responsible for their safety. It is necessary to supervise
children and ensure they will not play with the device.
Do not dispose the device and/or batteries
after their lifetime as communal waste, use
collection spots for recyclable waste. By
correct disposal of the device you will prevent
adverse impact to human health and the en-
vironment. Recycling of material contributes
to preserving of natural resources. More
information on recycling can be obtained
from local municipality office, organizations
processing the waste or the sales location
where you purchased the product.
Note
• Manufacturer reserves the right to change technical
parameters of the product.
• Manufacturer and vendor are not responsible for
incorrect operation in location with interference.
• Product is not designed for medical and commercial
use.
• Product contains small parts and therefore it shall be
placed out of reach of children.
• No part of the manual may be reproduced without
written consent of the manufacturer.