3
on the back side of the station – 1, 2 or 3 and then hold
the button, icon starts to blink.
Remove the battery compartment lid from the bottom
of sensor and insert batteries (2xAA).
Set required number of sensor channel - 1, 2, 3 by repe-
ated pressing of CH button, LED A will blink 1x, 2x or 3x.
Within 3 minutes the data from sensor will be read.
If no sensor signal is found, remove and put back the
batteries or press the RESET button.
Radio controlled clock (DCF77)
The wireless sensor will start to search for DCF77 signal
after connecting with the weather station.
If the signal is located, the D icon is displayed with the
current time.
For repeated search of DCF77 signal for the period of 10
minutes press and hold the °C/°F button on the sensor.
If no DCF signal is found, the reception will be updated
daily between 2:00 and 3:00am.
For proper reception do not place sensor near electrical
devices and mobile phones.
Indoor and outdoor temperature,
temperature units
The indoor and outdoor temperature is displayed
next to E icon.
Press repeatedly K button on the back of the station
to select displaying of outdoor or indoor temperature.
Use G button to choose temperature unit (°C/°F).
Automatic cyclic displaying of tem-
perature value on the display panel
1. Press repeatedly K button to enter AUTO mode.
2. Rotating icon
will come up on the display panel.
3. Display will show turns of data on indoor and outdoor
temperature of individual sensors.
4. Press repeatedly K button to deactivate AUTO mode,
icon will not be displayed.
Displaying max. / min. measured
temperatures
Press J button to display maximum and minimum
measured temperatures.
Hold this button to delete the measured temperature
from the memory.
Manual setting of time and date
Press and hold F button.
Press H and I buttons to set: 12/24hrs time format – hour
– minute – year – format of date – date – language of
calendar – receipt of DCF.
By holding the buttons the count is faster.
Press F button to move between individual values.
The calendar language may be: E (English), G (German),
F (French), S (Spanish), I (Italian).
Setting of alarm
The weather station has the feature of 2 alarms.
Press repeatedly F button to display the time of alarm.
Blinking B icon with the number of alarm (1,2) will
be displayed.
Press and hold F button to change the time of alarm.
Press H, I buttons to set the values.
By holding the buttons the count is faster.
After setting the minutes press I button for alarm activa-
tion, icon will be displayed.
Press again I button for alarm deactivation, icon will
disappear.
Snooze function and backlight of
the display panel (SNOOZE/LIGHT)
When the alarm buzzes, press gently upper part of the
alarm downwards.
The P sensors located on the bottom of the station
are activated.
Buzzing will be postponed by 5 minutes, icon of alarm
1, 2 will be blinking .
Press any button on the back side to deactivate SNOOZE
function– icon stops blinking but it will remain displayed.
Alarm clock will be activated next day.
To activate the blue light of display for 10 seconds, press
the upper part of the alarm.
Display backlight and 3D crystals
Press N button to set the intensity of backlight.
OFF (off) – DIMM (medium backlight) – BRIGHT (strong
backlight).
The OFF function of 10 second is turned off.
Press M button to set the backlight of crystals.
OFF (off) – AUTO (manual setting of backlight time) – ON
(permanent backlight).
Permanent backlight can work only with the connected
charging adapter and M button in ON position.
Press and hold G button to set the delay for backlight
This setting can function only when charging adapter is
connected and M button is in AUTO position.
Press H, I buttons to set time limit in intervals minutes.
Then press G button and select by H, I buttons (ON/OFF)
cyclic backlight of all 4 crystals.
Press again G button to return to basic menu.
