2
E0802 - WSC 802 -manual
0-0-0-K
EMOS spol. s r. o.
WSC 802 Weather Station
Weather station shows clock, 2 alarms with the snooze function, 3D crystals weather forecast, and information on
indoor and outdoor temperature. There is a memory of maximum and minimum temperatures.
Please read carefully this manual before you use this product.
GB
Specification:
Radio signal controlled clock
Indoor/outdoor temperature: -10°C to +60°C/-20°C
to +60°C
Temperature resolution: 0.1°C
Wireless sensor: transmission frequency 433 MHz
Reach of radio signal: up to 80 m in open space
Number of sensors: 3
Power supply:
Main station: 4x 1.5V AA batteries (not included) +
adapter 7V, 500mA
Sensor: 2x 1.5V AA batteries (not included)
Dimensions and weight
Main station: 180 x 77 x 70 mm, 655 g (without batteries)
Sensor: 65 x 25 x 97 mm; 70 g (without batteries)
Icons and Buttons
Main station
Front side, display panel
A – weather forecast
B – alarm clock no. 1, 2
C – current time /day name/date/time of alarm
D – receipt of radio signal DCF77
E – number of the outdoor sensor
Rear side
Pressing the button
Holding the button
F Displays time/day/date/
alarm time
Setting of time, date,
alarm
G Displays temperature in
°C/°F units
Setting of time of backli-
ght of 3D crystals
H 1 step forward
Searching for DCF radio
signal
I
1 step back
J
Displays maximum/
minimum values of
temperatures
K Displays indoor / out-
door temperature
L – indoor temperature sensor
M – setting of backlight of 3D crystals
N - setting of backlight of LCD display
O – deleting of all values
P – sensors of display illumination and snooze function
Wireless sensor
A – LED diode of signal transmission
B – hole for hanging on a wall
CH – number of channels for communication between
sensor and weather station
°C/°F – temperature unit (valid only for sensors with
LCD display)
RESET – deleting of all values at the sensor
Start up
First insert the batteries into the weather station (4 x AA),
plug charging adapter into connector L, and then insert
the batteries into the wireless sensor (2 x AA).
The charging adapter must be located on a well accessible
place for easy handling and disconnecting.
When inserting the batteries, follow the correct polarity in
order to prevent damage to the station and/or the sensor.
Use only alkaline batteries of the same type. Do not use
rechargeable batteries.
Place the units next to each other. The weather station
will find the sensor signal within three minutes. If no
sensor signal is found, press and hold K button for
repeated searching.
If the information on outdoor temperature disappears
from the display panel, press RESET button on the station.
The weather station will delete all the values and it will
search for the sensor signal.
We recommend placing the sensor on the northern
side of the house.
The range of the sensor will drop significantly in
obstructed areas.
The sensor is resistant to dripping water, but do not
expose it to permanent rain.
Do not place the sensor on metal objects; it will reduce
reach of its transmission.
If the low battery icon lights up , replace the batteries
in the sensor and/or in the station.
Channel change and connecting of
further sensors
Select the required sensor channel by pressing K button
