Emmaljunga NXT TWIN, Instruction Manual

Page: 43 / 320

43 NXT TWIN V2.1
SE
EN
BG
CZ
DE
DK
EE
ES
FI
FR
GR
HR
HU
IS
IT
LT
LV
NL
NO
PL
RO
SVK
ML
PT
RS
RU
SL
TR
3) ADJUST THE HOOD
3.1 Pull the hood gently forward or backward
to the desired position. For ventilation, roll the
fabric flap inwards on the back of the hood. The
UV/insect net is now visible.
4) INSECT NET (ACCESSORY)
4.1 Attach the Insect net using the zipper on
the hood. Pull the elasticated band of the insect
net completely over the front foot area.The net
is delivered with the chassis.
4.2 Use the press studs to secure the insect net
elasticated band onto the seat unit. Repeat on
the other side.
5) ASSEMBLY OF THE SEAT UNIT ON THE
CHASSIS
5.1 Click the seat unit into the chassis, making
sure it clicks in properly and securely. The seat
unit can be attached in the direction of travel or
against the direction of travel.
WARNING
Ensure that children are kept away
from all moving parts of the pram to avoid risk
of injury.
WARNING
Always check that the seat unit is
properly fixed firmly to the chassis before the
pram is used.
6) OPEN THE BUMPER BAR
6.1 Unfasten the crotch strap. Press the button
on the inside of the bumper bar and open.
7) CLOSE THE BUMPER BAR
7.1 Click the bumper bar into the bracket until
you hear a ”click”.
Fasten the crotch strap around the bumper bar.
WARNING
Ensure that children are kept away
from all moving parts of the pram to avoid risk
of injury.
WARNING
The bumper bar should always be
assembled when in use.
WARNING
Always check that the bumper bar is
correctly assembled before use.
8) REMOVING THE SEAT UNIT FROM THE
CHASSIS
8.1 Pull both handles upwards and lift the seat
unit off the chassis
WARNING
Ensure that children are kept away
from all moving parts of the pram to avoid risk
of injury.
WARNING
Never leave a child in the seat unit
when removing the seat unit.
8.2 The seat unit can be adjusted into different
positions, lift the handle at the back of the seat
unit up and adjust to desired position.
WARNING
Always check that the seat unit is in
one of the positions by pushing it back until it
locks into place.
WARNING
Ensure that children are kept away
from all moving parts of the pram to avoid risk
of injury.
8.3 Press both of the buttons on each side of
the frame to adjust the footrest.
Please Note!
Maximum weight on the footrest
is 3kg.
WARNING
Never let your child stand on the
footrest.
9) ASSEMBLY OF THE APRON (ACCESSORY)
9.1 Pull the apron over the footrest.
9.2 Fasten the apron with the press stud on the
inside of the hood.Fasten the press studs at the
back of the apron to the back of the seat unit.
IMPORTANT!
The hood cannot be folded
down when the apron is permanently attached
to the hood.
Open the zip in the middle of the apron when
taking your child in or out of the pram.
10) REMOVAL OF THE SEAT UNIT FABRIC
10.1 Release the push buttons from the hood,
remove the hood from the seat frame,
WARNING
The hood must always be
assembled
when the pram is in use.
10.2 Unbutton the buttons and buckles on each
side.
10.3 - 10.4 open the zipper located under the
seat, remove the fabric from the seat plate.
10.5 Thread all seat belts through the holes.
10.6 Remove the push button around the
folding handle and remove the fabric from the
seat frame.
11) RAINCOVER (ACCESSORY)
11.1. Assemble the rain cover by placing it over
the hood and pull over the carrycot or the seat
unit.
11.2. The rain cover has a large window at the
top opening that you can open and close with
the Velcro fasteners.
11.3. Make sure that the side ventilation
windows are always open and free so that
ventilation is ensured.Always use rain protection
when it is raining or snowing. If the stroller is
wet, try to dry it first before using the rain cover.
Let the rain cover dry properly before putting it
back in its pocket.