43
ALU S V1.1
42
ALU S V1.1
EN
SEAT UNIT ERGO
1. ASSEMBLY AND USE OF THE SEAT UNIT
1.1 Seat Frame
Press both buttons on the sides of the footrest
to unfold.
1.2 Fold out both seat attachments.
1.3 Place the seat fabric cover over the top
edge of the seat frame.
1.4- 1.4.2 Thread the harness strap through the
seat fabric and then place the seat fabric around
the seat plate. Close the zipper underneath the
seat.
1.5 Position the safety straps around the frame
and click into the buckle on the back of the
backrest. Repeat on the left and right side of
the frame.
1.6 Fasten the press studs that secure the
fabrics to the frame on both sides.
1.7 Fasten the Velcro straps onto the footrest.
1.8 Click the back rest adjustment handle into
the bracket on both sides.
1.9 Thread the strap through the hole in the fa
-
bric and fasten around the back rest adjustment
handle with the press stud.
1.10 Insert the bumper bar into the brackets on
both sides of the seat unit.
1.11 Fasten the crotch strap around the bumper
bar.
WARNING
It is important that the seat unit
fabric is always fitted correctly.
WARNING
Never use this product without fully
assembling the seat unit fabrics onto the frame
first.
WARNING
The bumper bar should always be
assembled when in use.
WARNING
Always check that the bumper bar
is correctly assembled before use.
WARNING
Ensure that children are kept away
from all moving parts of the pram to avoid risk
of injury.
2) ASSEMBLY/USE OF THE HOOD
2.1 Attach the hood onto the seat frame tubes
at both sides.
WARNING
Pinch point - Danger of trapping.
Please note: If the hood moves up and down on
the seat frame tube this can cause scratches.
Ensure the seat frame tube is free from dust and
dirt.
2.2 Pull the inner fabric over the top of the seat
frame and secure with the higher press stud.
Repeat for the left and right sides.
2.3 Pull the outer fabric over the top of the seat
frame and secure with the lower press stud.
Repeat for the left and right sides (The centre
press stud is for use with the optional footmuff/
accessories only).
WARNING
Ensure that children are kept away
from all moving parts of the pram to avoid risk
of injury.
WARNING
The hood should always be fitted
when the pram is in use.
WARNING
Never carry the stroller or the seat
unit by the hood.
3) ADJUST THE HOOD
3.1 Pull the hood gently forward or backward to
the desired position.
For ventilation, roll the fabric flap inwards on
the back of the hood. The UV/insect net is now
visible.
4) INSECT NET (DELIVERY WITH CHASSIS)
4.1 Attach the Insect net using the zipper on
the hood. Pull the elasticated band of the insect
net completely over the front foot area.The net
is delivered with the chassis.
4.2 Use the press studs to secure the insect net
elasticated band onto the seat unit. Repeat on
the other side.
5) ASSEMBLY OF THE SEAT UNIT ON THE
CHASSIS
5.1 Click the seat unit into the chassis, making
sure it clicks in properly and securely. The seat
unit can be attached in the direction of travel or
against the direction of travel.
WARNING
Ensure that children are kept away
from all moving parts of the pram to avoid risk
of injury.
WARNING
Always check that the seat unit is
properly fixed firmly to the chassis before the
pram is used.
6) OPEN THE BUMPER BAR
6.1 Unfasten the crotch strap. Press the button
on the inside of the bumper bar and open.
7) CLOSE THE BUMPER BAR
7.1 Click the bumper bar into the bracket until
you hear a ”click”.
Fasten the crotch strap around the bumper bar.
WARNING
Ensure that children are kept away
from all moving parts of the pram to avoid risk
of injury.
WARNING
The bumper bar should always be
assembled when in use.
WARNING
Always check that the bumper bar is
correctly assembled before use.
8) REMOVING THE SEAT UNIT FROM THE
CHASSIS
8.1 Pull both handles upwards and lift the seat
unit off the chassis
WARNING
Ensure that children are kept away
from all moving parts of the pram to avoid risk
of injury.
WARNING
Never leave a child in the seat unit
when removing the seat unit.
8.2 The seat unit can be adjusted into different
positions, lift the handle at the back of the seat
unit up and adjust to desired position.
WARNING
Always check that the seat unit is in
one of the positions by pushing it back until it
locks into place.
WARNING
Ensure that children are kept away
from all moving parts of the pram to avoid risk
of injury.
8.3 Press both of the buttons on each side of
the frame to adjust the footrest.
Please Note!
Maximum weight on the footrest
is 3kg.
WARNING
Never let your child stand on the
footrest.
9) ASSEMBLY OF THE APRON (
ACCESSORIES
)
9.1 Pull the apron over the footrest.
9.2 Fasten the apron with the press stud on the
inside of the hood.Fasten the press studs at the
back of the apron to the back of the seat unit.
IMPORTANT!
The hood cannot be folded
down when the apron is permanently attached
to the hood.
Open the zip in the middle of the apron when
taking your child in or out of the pram.
10) REMOVAL OF THE SEAT UNIT FABRIC
10.1 Release the push buttons from the hood,
remove the hood from the seat frame,
WARNING
The hood must always be assemb
-
led when the pram is in use.
10.2 Unbutton the buttons and buckles on each
side.
10.3 - 10.4 open the zipper located under the
seat, remove the fabric from the seat plate.
10.5 Thread all seat belts through the holes.
10.6 Remove the push button around the
folding handle and remove the fabric from the
seat frame.
11) RAINCOVER (
ACCESSORIES
)
11.1. Assemble the rain cover by placing it over
the hood and pull over the carrycot or the seat
unit.
11.2. The rain cover has a large window at the
top opening that you can open and close with
the Velcro fasteners.
11.3. Make sure that the side ventilation win
-
dows are always open and free so that ventila
-
tion is ensured.Always use rain protection when
it is raining or snowing. If the stroller is wet, try
to dry it first before using the rain cover. Let the
rain cover dry properly before putting it back in
its pocket.
5-POINT HARNESS (ERGO)
1) BUCKLE THE CHILD
1.1 Place the 5 harness straps in front of the
child so that the child is not sitting on them.
1.2 Assemble the left shoulder and waist straps
by sliding the upper left buckle into the lower
left buckle until it clicks into place.
1.3 Assemble the right shoulder and hip straps
by sliding the upper right buckle into the lower
right buckle until it clicks into place.
1.4 Click the right buckle over the left buckle
until they are held together as a unit. It is very
important that they sit together properly and
that they cannot be pulled apart.
1.5 Lock the harness with the harness lock on
the crotch strap with a “” CLICK “”.
WARNING
Always check that the belt is
properly closed by pulling on it.
1.6 Adjust the harness using the sliding adjus
-
ters (3) on the shoulder and hip belts so that the
belt fits snugly on the child’s body.
To release the shoulder and waist straps, press
in the buttons on the sides of the harness lock.
WARNING
Always fasten the child in with the
harness when the child is sitting in the stroller.
Check that all buckles are correctly fastened and
that the harness is securely assembled in the
stroller.
WARNING
Never use the seat if parts of the
5-point harness are missing or if the harness is
damaged. Always check that the harness is
properly closed.
WARNING
The 5-point harness contains
magnets or magnetic components. Magnets
that attract each other or a metallic object in the
human body can cause serious injury or death.
