45
ALU S V1.1
44
ALU S V1.1
EN
Seek medical advice immediately if magnets are
swallowed or inhaled.
WARNING
Medical devices such as implanted
pacemakers and defibrillators might contain
sensors that respond to magnets and radios
when in close contact. To avoid any potenti
-
al interactions with these devices, keep the
harness a safe distance away from your device
(more than 15 cm apart). But consult with your
physician and your device manufacturer for
specific guidelines.
2) CHANGE POSITION OF THE HARNESS
2.1 Shoulder straps, Remove the hood. Remove
the shoulder pads. Push the shoulder and hip
straps through the holes in the seat cover.
2.2 Open the zipper underneath the seat.Open
the press studs that secure the seat fabric over
the frame.
Open the press stud that holds the adjustment
handle.Pull the back plate out of the fabric and
place the shoulder straps in the desired position
in the back plate.Insert the shoulder straps into
the seat fabric in the same position.Slide the
back plate back into the seat cover.
2.3 - 13.3.3 The Crotch Strap
Pass the crotch strap through the seat cover and
the seat plate. Then mount the crotch strap in
the desired position in the seat plate and pass
the crotch strap in the same position through
the fabric. Close the zipper at the bottom of the
seat. Close the press studs firmly over the frame
on both sides.Thread the strap through the hole
in the fabric and secure it around the adjust
-
ment handle with the press stud.
Put the shoulder pads onto the shoulder straps.
WARNING
Before you use the pram again
always check that the seat unit fabric is secure
and that all zips are securely and properly
fastened
WARNING
It is important that the seat unit
fabric is always correctly fitted
WARNING
Never use the pram without making
sure the seat unit fabric is correctly assembled
on the frame first.
SEAT UNIT FLAT
1) ASSEMBLY AND USE OF THE SEAT UNIT
1.1 The seat unit is delivered fully assembled.
Only the bumper bar and the hood need to
be assembled.Insert the bumper bar into the
brackets on both sides of the seat until you hear
a click.
1. 2 Fasten the crotch strap around the bumper
bar.
WARNING
The bumper bar should always be
fitted when using the seat unit.
WARNING
Always check that the bumper bar is
correctly attached to the seat unit before use.
2) OPEN THE BUMPER BAR
2.1 Unfasten the crotch strap.
2.2 Press the button on the inside of the bumper
bar to open
WARNING
The bumper bar should always be
fitted when using the seat unit.
WARNING
Always check that the bumper bar is
correctly attached to the seat unit before use.
3) CLOSE THE BUMPER BAR
3.1 Click the bumper bar into the bracket until
you hear a ”click”.
3.2 Fasten the crotch strap around the bumper
bar.
WARNING
Ensure that children are kept away
from all moving parts of the pram to avoid risk
of injury.
WARNING
The bumper bar should always be
fitted when using the seat unit.
WARNING
Always check that the bumper bar is
correctly attached to the seat unit before use.
WARNING
Never carry the seat unit/stroller by
the bumper bar.
4) ASSEMBLY / USE OF THE HOOD
4.1 Insert the hood in both sides of the seat until
you hear a click.
4.2 Secure the back of the hood by using the 3
velcro strips.
You can click Emmaljunga’s footmuff (accessory)
into place using the eyelets/D-rings behind the
backrest.
WARNING
Ensure that children are kept away
from all moving parts of the stroller to avoid risk
of injury.
WARNING
Never carry the seat unit/stroller by
the hood.
5) ADJUST THE HOOD
5.1 Pull the hood gently forward or backward to
the desired position.
6) EXTENDING THE HOOD
6.1 To extend the hood to protect the child from
weather you can open the zip on the hood.
6.2 Pull the hood forward and the hood extends.
There is a ventilation and UV/insect net built in
the back of the hood (only on certain models).
WARNING
The hood should always be assemb
-
led when the stroller is in use.
IMPORTANT!
The hood cannot be folded
down when the optional apron is attached to
the hood.
7) INSECT NET (DELIVERY WITH CHASSIS)
7.1 Attach the Insect net using the zipper on the
hood. Pull the elasticated band of the insect net
completely over the front foot area.The Insect
net is delivered with the chassis.
7.2 Use the press stud to secure the elasticated
band of the insect net onto the seat unit. Repe
-
at on the other side.
7.3 Storage pocket for the Insect net.
8) ATTACH THE SEAT UNIT ON THE CHAS-
SIS
8.1 Click the seat unit into the chassis, make
sure it clicks in properly and securely on both
sides.The seat unit can be attached in the
direction of travel or against the direction of
travel.
WARNING
Ensure that children are kept away
from all moving parts of the pram to avoid risk
of injury.
WARNING
Always check that the seat unit is
securely fixed to the chassis before the pram is
used.
WARNING
Hold the carrying handles until the
seat unit is in place.
9) REMOVAL OF THE SEAT UNIT FROM THE
CHASSIS
9.1 Pull both handles on the sides upwards and
lift the seat unit off the chassis.
WARNING
Ensure that children are kept away
from all moving parts of the stroller to avoid risk
of injury.
WARNING
Never leave a child in the seat unit
when removing/attaching the seat unit.
10 ADJUST THE BACK REST.
The back rest of the seat-unit can be adjusted
into various positions.
Adjust the back rest by squeezing the plastic
adjuster together on the back of the seat unit
and recline the back rest gently to the desired
position. To adjust the back rest into upright
position pull the back rest forward.
Open the zippers on both sides of the hood
before you put the backrest in the full lying
position.
WARNING
Ensure that children are kept away
from all moving parts of the stroller to avoid risk
of injury.
11 ADJUST THE FOOTREST
Pull the grey handle on either left or right side
of the footrest to adjust it.
Please Note! Maximum weight on the footrest
is 3kg.
WARNING
Never let your child stand on the
footrest.
WARNING
Ensure that children are kept away
from all moving parts of the stroller to avoid risk
of injury.
12 ASSEMBLY OF THE APRON (
ACCESSORIES
)
12.1 Pull the apron over the footrest.
12.2 Fasten the apron with the press studs on
the inside of the hood and on the seat frame.
IMPORTANT!
The hood cannot be folded
down when the apron is attached to the hood.
12.3 Open the zip in the middle of the apron
when taking your child in or out of the pram.
13 RAINCOVER (
ACCESSORIES
)
13.1 Assemble the rain cover by placing it over
the hood and pull over the carrycot or the seat
unit.
13.2.The rain cover has a large window at the
top opening that you can open and close with
the Velcro fasteners.
13.3. Make sure that the side ventilation win
-
dows are always open and free so that ventila
-
tion is ensured. Always use rain protection when
it is raining or snowing. If the stroller is wet, try
to dry it first before using the rain cover. Let the
rain cover dry properly before putting it back in
its pocket.
14) ASSEMBLY OF THE SEAT UNIT FABRIC
14. 1 Place the seat unit fabric in the seat unit.
Thread the shoulder straps through the fabric.
14. 2 Thread the crotch strap through the seat
fabric (see illustration).
14. 3 Thread the waist straps through the seat
unit fabric.
14. 4 Fasten all of the press studs on the seat
unit.
14. 5 There are a total of 13 press studs. 5 press
studs on each side and 3 on the back.
14. 6 Attach the crotch strap by positioning it
around the bumper bar and secure it by faste
-
ning the press stud.
14. 7 Attach the hood into the frame
14. 8 Attach the hood in place using the velcro
strips attached to the seat unit fabric.
WARNING
It is important that the fabric is
always correctly fitted. The seat unit should
never be used without fully fitting the seat unit
fabric.
WARNING
Before you use the stroller, check
that the seat fabric is secure and that all the zips
