28
=
=
Or
=
=
Or
Manual Reset-1.
Device continues to count till manual reset is applied.
(Output PulseTime is not considered)
Output Functions
Count direction : 0 --> P (Upcounting)
=
When count value reaches the Set Value, Output Position is changed.
Counting process continues over the SET value
.
Output Pulse Time is not
considered. Process counts, until manual reset happens. Counting is
continues, while Start input is active. When Start input is passive, count value
becomes “0”. When Manual Reset happens, count value becomes 0 value.
Counting direction : P --> 0 (Downcounting)
=
0
Set
Reset
Output
Start
0
Set
Reset
Output
Start
When count value reaches the 0 Value, Output Position is changed.
Counting process continues under the 0 value
.
Output Pulse Time is not
considered. Process counts, until manual reset happens. Counting is
continues, while Start input is active. When Start input is passive, count value
becomes SET value. When Manual Reset happens, count value becomes SET
value.
