31
=
=
=
=
i
Automatic Reset-1
Counting direction : 0 --> P (Upcounting)
=
When count value reaches the Set Value, Output Position is changed. Actual value
is reset automatically. While Start input is active, then counting starts upcounting
from 0 value. If Output Pulse time is not 0, then Output Position is changed at the end
of the Pulse time.
If Output Pulse time is “0”, then Output Position has not changed
until
Manuel Reset
happens.
When Manual Reset happens, count value becomes 0 value.
When count value reaches the 0 Value, Output Position is changed. Actual value is
reset automatically. If Start input is active, then counting starts downcounting at Set
value. If Output Pulse time is not 0, then Output Position is changed at the end of the
Pulse time. If Pulse time is “0”, then Output Position has not changed
until
Manuel
Reset happens.
When Manual Reset happens count value becomes SET value.
Counting direction : P --> 0 (Downcounting)
=
0
Set
Reset
Output
Output
Start
0
Set
Reset
Output
Output
Start
If output functions parameter is selected Automatic Reset (
, or , then must be different from zero
for realizing Automatic Reset.
