background image

41

Time Unit and Scale 
Selection

Reset and Set 
Protection

 6. Failure Messages in EZM-4435 Programmable Timer

Operation 
Screen

Password Screen

No digit flashes

1-

If the password is not 0, user can access to the parameters without entering the password 

and by pressing ENTER button.
User can see all parameters except for programming password parameter                 but user 
can not do any changes in parameters. If password is entered for accessing to the parameters 
correctly, most significant digit of the parameter flashes. But if the password is not entered, 
flashing of the most significant digit is not realised.

When PROG button is pressed, 
password entering screen will 
appear.

Press ENTER 
button without 
entering the 
password.

The most 
significant digit 
of the parameter 
(4th digit for this 
parameter) 
flashes.

By pressing ENTER 
button, user can see all 
parameters except for 
program password

Press PROG button to exit 
from programming mode.

Continue to press ENTER 
button for scanning the 
parameters.

O1

O2

SV

S2

Timer

RESET

P

SET

O1

O2

S1

S2

Timer

RESET

P

SET

O1

O2

SV

S2

Timer

RESET

P

SET

O1

O2

S1

S2

Timer

RESET

P

SET

Summary of Contents for RS Pro EZM Series












































Reviews: