8.2.3 MODULE-2 Configuration Parameters
Module-2 configuration parameters are arranged automatically by the device
according to the module type in Module-2 socket. These parameters are not
accessible if there is no module in Module-2 socket.
EMO-400,EMO-410
EMO-420
EMO-430
i
EMO - 400
EMO - 410
EMO - 420
56
It determines logic output function of the output module in
Module-2 socket
Defines alarm type
Alarm-2 hysteresis value
Alarm off delay time
Alarm on delay time
Configuration of analogue output module
Module-2 configuration parameters are defined according to which output modules are
plugged in Module-2 socket.
These parameters are active if EMO-400 (Relay Output) , EMO-410
(SSR Driver) or EMO-420 (Digital Output) module is plugged in
Module-2 socket.
Alarm output
Sensor break alarm output
It determines logic output function of the output module in
Module-2 socket
Process high alarm
Process low alarm
It determines alarm type. It is active if logic output function of Module-2
is adjusted alarm output.
Output is active when the process value is out of the band
which is defined with minimum value of operating scale
And maximum value of operating scale
