1
2
1
2
3
1-Loosen the screws.
2-Lift the locking tabs located on both the right
and left hand sides and pull the fixing clamp
from the device while holding the unit in place.
3-Pull the unit through the front side of the panel
Before starting to remove the unit from panel, power off the unit and the related
system.
Montage of the unit to a system must be done with it’s own fixing clamps. Do not
do the montage of the device with inappropriate fixing clamps. Be sure that
device will not fall while doing the montage.
The unit is designed for panel mounting.
1-Insert the unit in the panel cut-out from the
front side.
2-Insert the mounting clamp from the rear side
of the unit and screw up the fixing screws until
the unit completely immobile within the panel
2.6 Installation Fixing Clamp
2.7 Removing from the Panel
c
c
13
Process
Indicator
ESM-4400
SET
O1
O2
O3
°C
°F
V
Process
Indicator
ESM-4400
SET
O1
O2
O3
°C
°F
V
