PANEL MOUNTING
1-
2-
3-
Before mounting the
device in your panel,
makesure that the panel
cut-out is suitable.
Check front panel gasket
Position.
Insert the device through
the cut-out. If the mounting
clamp are on the unit, put
out them before inserting
the unit to the panel.
4-
5-
Insert the unit in the panel
cut-out from the front side.
Insert the mounting
clamps to the holes that
located top and bottom
sides of device and screw
up the fixing screws until
t h e u n i t c o m p l e t e l y
immobile within the panel.
1
2
3
4
4
5
5
6
