Parameter Definitions
:Input Types and Functions
0 :
. (INC)
1 :
Down
. (DEC)
2 :
,Down
.(INC/DEC)
3 :
. (INC/INC)
4 :
.(UP/DOWN)
5 :
x1
.(For Incremental Encoder )
6 :
x2
.(For Incremental Encoder )
7 :
x4
.(For Incremental Encoder )
Upcount on rising edge of Ch-A input
count on rising edge of Ch-A input
Upcount on rising edge of Ch-A input
count on rising edge of Ch-B input
Upcount on rising edge of Ch-A input,Upcount on rising edge of
Ch-B input
Upcount on rising edge of Ch-A input when Ch-B is at 0 Downcount on rising edge of Ch-A
when Ch-B is at 1
Phase Shifting
Phase Shifting
Phase Shifting
: Selection of Input Type Function for Chronometer
0 :
Frequency or cycle is calculated by measuring cycle time of the signals in Ch-A input
Frequency or cycle is calculated by counting the pulses in Ch-A input during the time
is set in measurement period.
.
1 :
0 :
Period measurement in Ch-A input
Pulse time measurement in Ch-A input
Sum of the time difference between Ch-A and Ch-B inputs rising edges
.
1 :
.
2
:
.
: Selection of Measuring Method
: Pulse Time of Ch-A, Ch-B, Reset and Pause Input
It is used to protect against the electrical contact debounce or the signal that is less than
the determined pulse time.
It can be adjusted from to millisecond.
: Selection of Time Unit and Scale
Hour / Minute It can be adjusted from
.
0 to 99.59.
Minute
It can be adjusted from
/ Second .
0 to 99.59.
Second / milisecond.
0 to 99.99.
It can be adjusted from
Hour / Minute It can be adjusted from
.
0 to 23.59.
Hour.
0 to 999.99.
It can be adjusted from
Minute.
0 to 999.99.
It can be adjusted from
Second.
0 to 999.99.
It can be adjusted from
0:
: Output Functions
Manual Reset-1:
Device continues to count till manual reset
is applied. When count value reaches the
Set value, output position is changed.
Set1
0
Out-1
Set2
Reset
Out-1
Out-2
=
=
=
=
8
