4-
If actual value is flashing and counting is not
performed;
It appears if any of the count value is less than the
minimum count value.
(Total count value for Counter/
“
Totalizer Counter”
Function - Batch count value for Batch Counter
FUNCTION )To remove this warning and reset the
count value press RESET button.
3-
If Actual Value is flashing and counting is stopped;
It appears if any of the count value is bigger than
the maximum count value.(Total count value for
Counter/”Totalizer Counter”
Function - Batch count value for Batch Counter
FUNCTION )
To remove this warning and reset the count value
press RESET button.
SET1
SET2
TOTAL RESET
S2
O1
O2
S1
SET1
SET2
TOTAL RESET
S2
O1
O2
S1
W h e n
P R O G
button is pressed,
password entering
screen will appear.
Main Operation
Screen
Password Screen
SET1
SET2
TOTAL RESET
SET1
SET2
TOTAL RESET
Input Types and
Functions
SET1
SET2
TOTAL RESET
SET1
SET2
TOTAL RESET
Multiplication
Coefficient
Main Operation
Screen
SET1
SET2
TOTAL RESET
SET1
SET2
TOTAL RESET
Input Types and
Functions
S2
S2
Press
ENTER
Button without
entering the
password.
By pressing
ENTER
button, user can
see all parameters
except for program
password.
Press
PROG
button to exit
from
programming
mode.
Continue to
Press
ENTER
button for
scanning the
parameters.
14
Failure Messages in EZM-XX50 Timer & Counter
1-
Position of the DIP Switch is wrong. (DIP Switch
determines the operation function of the device
and it is under the top cover.)
2-
If the password is not 0, user can access to the parameters
without entering the password and by pressing ENTER button.
SET1
SET2
TOTAL RESET
S2
