SET
°C
SV
PR
24
4.6 Observation Of Minimum&Maximum Recording Temperature Value On The Display
In main operation screen, If increment button is pressed then the maximum recording
temperature value is shown on the display.
Main Operation Screen
SET
°C
SV
PR
SET
°C
SV
PR
M
ax
M
in
M
ax
M
in
When power is first applied to the device, the device is start to recording minimum&maximum
temperature value after the number of thermostat, is defined parameter value
is executed.
Obervation of this recording temperature values is explained below.
Main Operation Screen
Main Operation Screen
SET
°C
SV
PR
SET
°C
SV
PR
M
ax
M
in
M
ax
M
in
Main Operation Screen
In main operation screen, If decrement button is pressed then the minimum recording
temperature value is shown on the display.
Main Operation Screen
SET
°C
SV
PR
SET
°C
SV
PR
M
ax
M
in
M
ax
M
in
Main Operation Screen
In main operation screen, If decrement and SET buttons are pressed together the message
is shown on the display, after 5 seconds pressing these buttons display starts to blink and the
maximum and minimum recording temperature values are reset to the measurement
temperature value at that time.
Main Operation Screen
SET
°C
SV
PR
SET
°C
SV
PR
M
ax
M
in
M
ax
M
in
Main Operation Screen
In main operation screen, If pressed the increment or decrement buttons before the device is
start to recording minimum&maximum temperature value, the message is shown on the
display.
Main Operation Screen
When defrost time parameter value
³
1, button
protection parameter value = 0 or 2 and cooling
operation is performed (compressor output led is on),
if defrost button is pressed for 3 seconds in main
operation screen, defrost operation starts and
defrost active becomes active. If defrost button is
pressed for 3 seconds while defrost continues,
defrost is finished and defrost active led becomes
inactive.
3 secs
4.5 Defrost ON/OFF Operation
Compressor output led