Programming Mode Accessing Password
It is used for accessing to programming mode. It can be adjusted from 0 to 999.
If it is 0, password is not entered for accessing to the parameters.
( Default = 0 )
Logging Option Parameter
( Default = 0 )
Minimum&Maximum temperature recording is not active during the door
switch is opened.
Minimum&maximum temperature recording is continue even door switch
is opened.
Logging Starting Time After Door Switch is closed
After the door switch is closed, this time delay must be expired for activation of the
minimum & maximum temperature recording.
It can be adjusted from 0 to 99 minutes.
( Default = 0 )
If logging option parameter is 0, then this parameter is observed.
23
Door Open Alarm Time
If door switch is remaning open for a long time than this time parameter, device give
the door open alarm; display begins to blink and buzzer will be active. If this
parameter is 0, then door open alarm is not active.
It can be adjusted from 0 to 99 minutes.
( Default = 0 )
Minimum&Maximum Temperature logging start option After Power On
Parameter
.
It can be adjusted from 1 to 99.
( Default = 1 )
When power is first applied to the device, the device is start to recording
minimum&maximum temperature after this parameter defined number of
temperature value is being equal or lower than temperature set value
Buzzer Function Selection Parameter
( Default = 1 )
Buzzer is inactive.
Buzzer is active during defrost operation.
Buzzer is active if an alarm occurs.
Buzzer is active during sensor failures.
Buzzer is active during defrost operation, alarm or sensor failures.
Button Protection Parameter
( Default = 0 )
There is no protection
Defrost time can not be changed and defrost ON/OFF operation is not
performed.
SET value can not be changed.
Defrost time and SET value can not be changed. Defrost ON/OFF
operation is not performed.
Buzzer Activity Time
It can be adjusted from 1 to 99 minutes. When this parameter is 1, if decrement button
is pressed, is observed. In this condition buzzer is active till buzzer silence
button is pressed.
( Default = )