background image

-14-

Instructions

Side push button instruction

※ Warm prompt
Please adjust seat temperature to ordinary or low temperature.
To prevent user is scalded,system will decrease seat temperature after seated 15mins.
Please click remote control softly and keep it properly;please push side button softly.

Posterior & Feminine cleaning function show:

Function 1:Press posterior/feminine cleaning button to start clean
                      hip/women’s private parts.
Function 2:Based on Function 1 as above,press relevant button
                      again to stop cleaning.
Function 3: Hold the“Posterior/osterior/Feminine”Cleaning
                       button more than 2 seconds to starts funlly auto-
                       working mode,the work steps are as below:Back
                       and forth Posterior/Feminine Cleaning 30S-back and
                       forth powerful massage 60s-drying 2 minute Stop
                       working.
Remark:remote could stop or start back and forth cleaning &
                 switch massage working mode.
Press the posterior cleaning button more than 5 seconds it can turn
off/on LED.

Dry function show:

Function 1:Press the dry button to start dry the moist parts with
                      warm wind.
Function 2:Underdry mode,press the dry button to stop drying.

Push button function show:

Function 1:Under posterior/feminine cleaning mode,push forward
                      the side button to adjust the position of the nozzle;
                      (default gear is 3,total 5 gears)
Function 2:Under posterior/feminine cleaning mode,push forward
                      the side button to adjust volume of water;
                      (default gear is 3,total 5 gears)
Remark:The way to switch the above two functions is to hold the dry
                  button more than 2 seconds,the function switch successfully
                  after it sounded “Di”
Function 3:Under the dry mode,push forward the side button to adjust
                      temperature;(default gear is 3,total 5 gears)

※ If the buzzer sounded two,it means that the
     function has reached limit when in use.

Posterior cleaning button

Button(the button moves

 backward

 or forward)

feminine cleaning button

Dry button

Flow adjusting

Under rear mode or bidet mode,press plus button will increase the water flow,press
minus button will decrease the water flow.Total 5 gears,and corresponding indicator
will on under different gear.

Seat  temperature adjusting

Seat heated after opened,press plus button will increase seat temperature,press
minus button will decrease seat temperature.Total 5 gears,and corresponding
indicator will on under different gear.

Summary of Contents for B01 Series





























Reviews: