EMKO B01 Series, Instruction Manual

Page: 24 / 28

-20-
Trouble shooting and alarm maintenance
Phenomenon
If the power light glitters 1 times
as it lights for 2 seconds
It can be detected that the inlet water
temperature sensor is faulted or broken circuit.
It can be detected that the outlet water
temperature sensor is faulted or broken circuit.
It can be detected that the wind temperature
sensor is faulted or broken circuit.
It can be detected that the seat temperature
sensor is faulted or broken circuit.
It can be detected that the dryer fan is faulted.
The leakage is beyond a normal range
If the power light glitters 2 times
as it lights for 2 seconds
If the power light glitters 3 times
as it lights for 2 seconds
If the power light glitters 4 times
as it lights for 2 seconds
If the power light glitters 7 times
as it lights for 2 seconds
When the product is in use，
the leakage protection switch
on the power supply trip from
time to time
Reasons Measures
You should cut off the power supply
immediately and stop using the
product，then contact the local
dealer or call service hotline.
※ WARM PROMPT
If you are in trouble，please read the above troubleshooting and repair the product according to the instruction of the
solution. If the problem is not in the common troubleshooting，please contact the professionals，dealers，or call the
national unified service hotline to ask for help.
Please note that there will be no any notification if any changes to this product and also accessories.
There may be differences between contents and material objects，please subject to the latter one.