Eminent EM4543, User Manual

Page: 43 / 248

14 |
ENGLISH
12. Fill out a password in the field ‘Network Key’. For this WEP key you are only
allowed to use numbers from 0 till 9 and the letters a till f. Do not use any
punctuation marks and make sure the password is exactly 26 characters long.
13. Write down the network name and the chosen password**.
14. Click ‘Next’.
15. Click ‘Finish’.
16. The wizard will now save the settings and will close the screen automatically.
5.4 Finishing the installation procedure of your Access
Point
After following chapter 4, you can finish the installation procedure:
1.
Remove the UTP network cable from your computer.
2. Remove the UTP networking cable from the LAN port of your router.
3. Restart your computer.
4. Congratulations! You have now properly installed the router.
An explanation how to connect your wireless network using Windows XP, Windows
Vista and Windows 7can be found in chapter 8.0
** The connection is lost when WPA2 AES or WEP has been enabled in the router
and not yet in the wireless network adapter. When WEP/WPA2 AES has also been
enabled in the wireless network adapter, the connection will be repaired.
Write down the security method, the network name and the key:
WPA2 AES WEP
Network name: _____________________________________________________
Key: _____________________________________________________
6.0 Configuring the router as a signal booster
(WDS)
Do you already have a wireless network and do you like to increase the range of the
wireless signal? Then connect the router as a signal booster. In order to realize this,
several settings of your signal booster (2) and of your wireless router / access point (1)
must be modified.