17
CAbIneT ASSeMbLY
Assemble Cabinet
verify system is leak-free and all piping has been properly
installed before reassembling cabinet.
Assemble Cabinet
1.
Replace bottom panel. See Figure 24.
2.
Fasten right end cap using Phillip head screw.
3.
Replace and tighten remaining screws across bottom
panel.
4.
Replace left end cap. See Figure 25.
5.
Tighten screw on right when end cap is properly
seated.
6.
Tighten bottom end cap screw.
7.
Replace grille. See Figure 26.
8.
Tighten top screw on left end cap.
figure 24 - Replace bottom panel
1
2
3
figure 25 - Replace Left end Cap
4
5
6
figure 26 - Replace grille
7
8
