21
WLHV COnTROLLeR
figure 27 - Hand Held Remote Operation
pOWeR
Press to turn unit ON or OFF. Press and hold 2 seconds to transmit all settings
to unit-mounted controller.
MODe
Press to toggle through operating modes — Heat, Cool, Auto Changeover, Dry
or Fan.
CLOCK
Normal operation — hold 3 seconds to enter Set Time mode; press again to
finish and exit. In programming mode — press to enter previous selection.
LOUVeR
*Press to toggle motorized louver on or off.
Up
Normal operation — press to increase setpoint temperature. Configuration, Set
Time or Programming mode — press to increase setting.
DOWn
Normal operation — press to decrease setpoint temperature. Configuration, Set
Time or Programming mode — press to decrease setting
fAn
Press to toggle between fan modes — High, Med, low or Auto.
pROgRAM
Normal operation — Press to toggle between manual operation and Pre-
programmed (7 - day) run mode. Configuration, Set Time or Programming
mode — press to enter next selection.
TIMeR
Press to toggle Timer mode on/off.
TeST
While in Heating or Cooling mode, press 5 seconds to enter test mode.
Intended for service only. Holds unit at a fixed speed. See Table 4
fAST
While in Heating or Cooling, press 5 seconds enters Turbo mode for 30
minutes.
MODe +
pROgRAM
With unit in OFF mode — Press and hold 5 seconds to enter Configuration
mode; press again to exit.
pROgRAM
+ CLOCK
With unit in OFF mode — Press and hold 5 seconds to enter Configuration
mode; press again to exit.
fAn +
pROgRAM
With unit in 7-Day Programming mode — Press and hold 3 seconds to copy
settings for selected day to all other days.
