16
Log On Screen
Press Log on Button and the above screen will ap-
pear. When altering setpoints, log on is necessary.
Select appropriate user name and enter password
to change/access setpoints.
To Log On: Touch the current User Name in the white
User Name box to display the keypad. Enter your User
Name (case sensitive) and Password (case sensitive)
then touch the <_| enter key.
Some Users are configured such that their passwords
may be changed. To change a User’s password,
touch the Password box or the “abc” button then
enter the old password, new password and confirm
the new password.
To Log Off: Touch the Log Off button. This will return
to the DEFAULT low-level user. The DEFAULT user
may navigate to most screens but cannot change
settings.
Log On or Off
Note: An operator will be automatically
logged off after 10 minutes of inactivity.
Note: The machine can be run and moni-
tored without logging on. To change the
setup or parameters of the machine, the
operator must log on.
Summary of Contents for VSG & VSSG
