Emerson Vilter VSG128, Installation, Operation And Service Manual

Page: 5 / 84

iii
HPLD Single Screw Compressor • Installation, Operation and Service Manual • Emerson • 35391HP
!
WARNING
Read and understand
operator´s manuals before
using this machine.
Failure to follow operating
instructions could result in
serious injury.
Important Message
READ CAREFULLY BEFORE INSTALLING AND STARTING YOUR COMPRESSOR.
The following instructions have been prepared to assist in installation, operation and removal of Vilter
TM
HPLD Single
Screw Bare Shaft Compressors. Following these instructions will result in a long life of the compressor with satisfac-
tory operation.
The entire manual should be reviewed before attempting to install, operate, service or repair the compressor.
Only qualified personnel shall operate, install and maintain the equipment.
Qualified personnel shall be accredited by a local regulatory agency, which requires that they are continually scruti-
nized by an organization whose sole mission is to establish, maintain and assure that the highest industry standards
are set and met in a continuous and ongoing basis. The credentials shall address topics ranging from plant safety,
operating concepts and principles and operations through the basics of refrigeration compliance and PSM (Process
Safety Management) requirements.
Follow local workplace occupational safety and health regulations.
A compressor is a positive displacement machine. It is designed to compress gas. The compressor must not
be subjected to liquid carry over. Care must be exercised in properly designing and maintaining the system to
prevent conditions that could lead to liquid carry over. Vilter
TM
Manufacturing is not responsible for the system
or the controls needed to prevent liquid carry over and as such Vilter
TM
Manufacturing cannot warrant equip-
ment damaged by improperly protected or operating systems.
Vilter
TM
HPLD Single Screw Compressor components are thoroughly inspected at the factory. However, dam-
age can occur in shipment. For this reason, the equipment should be thoroughly inspected upon arrival. Any
damage noted should be reported immediately to the Transportation Company. This way, an authorized agent
can examine the unit, determine the extent of damage and take necessary steps to rectify the claim with no
serious or costly delays. At the same time, the local Vilter
TM
representative or the home office should be noti-
fied of any claim made.
All inquires should include the Vilter
TM
sales order number, compressor serial and model number. These can be found
on the compressor name plate on the compressor.
All requests for information, services or parts should be directed to:
Vilter Manufacturing LLC
Customer Service Department
5555 South Packard Ave
Cudahy, WI 53110-8904 USA
Telephone: 1-800-862-2677; Fax:1-414-744-3483
E-mail: info.vilter@emerson.com; Web: Emerson.com/Vilter
Equipment Identification Numbers:
Vilter Order Number: _______________________Compressor Serial Number: _________________
Vilter Order Number: _______________________Compressor Serial Number: _________________