background image

SWITCHING SYSTEM MODE

Press the “Mode” button to switch between all available system mode settings.  

When the Mode is “Off” the thermostat will not bring on your heating or cooling systems.

 

FAN MODE

 

If you want to circulate the indoor blower, you can switch Fan to “On.” Turn the Fan back  

to “Auto” when you want the thermostat to control your indoor blower as necessary. Leaving  

the Fan in “On” will run your blower continuously.

 

HOLDING ONE TEMPERATURE

 

If you want to hold one temperature, turn Schedule “Off.” Then, adjust the set point using  

the up and down arrow buttons. The thermostat will hold this temperature, in the set Mode,  

until you turn Schedule back “On” or until you adjust the set point again using the up and  

down arrow buttons.

 

TEMPORARY HOLD

 

When your schedule is set to “On,” your Sensi thermostat controls your home based on  

the time and temperature settings in the current schedule. To temporarily change your  

temperature use the up and down arrows in the app or on the thermostat. Your Sensi  

thermostat will display “Temporarily Set To” on the thermostat and will hold your new  

temperature until the next scheduled set point with a minimum hold time of two hours.

 

TURN WI-FI OFF

 

If connecting to Wi-Fi is not an option, you can turn off Wi-Fi on the  

thermostat and manually set a time and a schedule from the wall unit.  

To turn off Wi-Fi:

 

Press “Menu”.

 

2

 Press “Next” five times to go to the “Wireless (Setup)” screen.  

 

     

     “On” should be flashing at the top.
 

3

 Use the up and down arrow buttons to change it to “Off”.

 

4

 Press “Exit”.

Basic Functionality

Sensi

TM

 Wi-Fi Programmable Thermostat  

|

  MANUAL OPERATION    

4

4

1

2

3

Summary of Contents for Sensi UP500W









Reviews: