TH008A Multi-function Infrared Thermometer
Functions
Real Time Clock
The real time clock will be recorded with the memory function and help you to recognize each measurement
result. (It includes the 12/24 Format_Hour_Minutes_Date.)
Please see the “Real time clock setting” section to learn how to setup the time in the first use.
Room Temperature
Suitable ambient temperature is important for the baby and patient, the thermometer always help you recognize
the room temperature.
Setting “Real time clock” first to enable this function. After power off, room temperature will be shown
on the screen with
icon.
Please see the “Use of the thermometer” section to learn how to get the correct room temperature.
Ear Temperature
The thermometer has been designed for practical use. It’s not meant to replace a visit to the doctor. Please also
remember to compare the measurement result to your regular body temperature.
Please see the “Use of the thermometer” section to learn how to measure the body temperature.
Stopwatch
The thermometer built the stopwatch function to help you to monitor the heartbeat since heartbeat is one of the
healthy indexes for people.
Please see the “Use of the Stopwatch” section to learn how to measure the heartbeat result.
Fever Alarm
If thermometer detects a body temperature > 37.5°C under ear mode, there will be a long beep sound followed
by three short beep sound to warn the user for potential fever.
Memory Locations
There are total 9 sets memories for body temperature measurements. Each memory also records the
measurement date/time/mode icon.
When in power on, Press the “ON/MEM” button to see the temperature stored with
icon.
°C / °F Switch
In “power off” mode (The LCD only shows the date, time and room temperature). Press and hold the “SCAN”
button, then immediately press and release the “ON/MEM” button. After 3 seconds, icon “°C” will be switched to
icon “°F”. (You may use the same way to switch back to “°C”)
Real time clock setting
1.
Power on: Press the “ON/MEM” button. The thermometer is ready for use after hearing two beep sounds.
2.
Press and hold the “ON/MEM” button for 5sec. When you see the Set icon starts flashing, it indicates that you are in the setting screen.(see the following figure.)
3.
Press the “SCAN” button to make the “24” icon flash. This indicates that you are in the 12/24-hour setting screen. Press the “SCAN” button to set 12/24-hour Format
from “24”(24-hour) to “12”(12-hour).
4.
Press “ON/MEM” button to move the flashing in the sequence shown below to select our settings:
hour
minutes
year
month
day
leave the setting screen.
5.
While the hour, minutes, year, month, day setting is flashing, use “SCAN” button to change it.
Use of the thermometer
1. Always make sure the probe is clean, and without damage.
2. Power on: Press “ON/MEM” button.(see figure 1)
3. Mode selection:
3.1
Ear mode
:
The preset mode of thermometer.
Press the “ON/MEM” button. Now the thermometer is ready for use after you see
the icon on the screen and hear two beep sounds. (see figure 1)
3.2
Stopwatch
:
P
ress and hold the “ON/MEM” button, and press the “SCAN” button one time for “stopwatch” mode. On your LCD display,
icon will replace
icon. In this mode,
you can count by 0.01sec to 3 minutes. (see figure 2)
4. Temperature taking:
4.1 Body Temperature: It is recommended that you measure 3 times with the same ear. If the 3 measurements are different, select the highest temperature.
4.1.1 Gently pull the ear back to straighten the ear canal (Fig.4.1.1) and snugly position the probe into the ear canal, aiming towards the
membrane of the eardrum to obtain an accurate reading (Fig.4.1.2).
4.1.2 Press and hold the “SCAN” button until you hear a beep sound. Remove the probe from ear and read the temperature
measurement on the LCD.
Remarks: a. To avoid the risk of cross contamination, please clean the probe according to “Care and cleaning” section after each use.
b. Before the measurement, please stay in a stable environment for 5 mins and avoid exercise, bath for 30 mins.
c. The different temperature varies in healthy persons between different parts of the body can be between 0.2~1°C
d. Clinical repeatability: 0.23°C (<1 year old),0.22°C (1~5 years old),0.21°C (>5 years old)
Specifications
Temperature measurement range: 34~42.2°C (93.2~108°F)
Operating temperature range: 10~40°C (50~104°F)
Storage temperature range: It should be stored at room temperature between -20~+50°C,
RH
≦
85%
Transportation temperature shall be less than 70°C, RH
≦
95%
Comply with ASTM E1965-98, EN12470-5:2003 Clinical thermometers-Part 5:Performance of
infra-red ear thermometers(with maximum device),
IEC/EN60601-1-2(EMC), IEC/EN60601-1(Safety) standards.
Accuracy: +/-0.2°C (0.4°F) within 35.5~42°C (95.9~107.6°F), +/-0.3°C (0.5°F) for other range.
Fever alarm & Memory locations under Ear mode (with each measurement date/time/mode icon)
Real time clock, °C / °F Switch mode
Battery: one lithium cell battery (CR2032 *1pcs)
This thermometer converts the ear temperature to display its “oral equivalent.”
There is no gender and age limitation for using infrared thermometer.
This is not an AP
or APG product.
Do not use this device for Live & Dead decision or Safety related applications.
Please consult with doctor if you have health concerns.
Figure 1 Figure 2
Figure 4.1.1
Figure 4.1.2
